● "1 Old Red Sandalwood (Red Sanders/Red Sanders) Short M" is a handmade wooden handle knob made with a penetrating urethane finish. ● Specifications/Size (approx.) Overall knob: Total length 36.7mm, weight 6.5g Wooden part: Grip minimum 13.7mm, head diameter 19.9mm, penetrating urethane finish (⚠️ No coating. Penetrating urethane is a water-repellent coating) Wheel cap: Aluminum alloy (with o-ring) ● Compatible shafts: Shimano A, Daiwa S When using the included bearing ① with a thickness of 2.0mm, assemble it using the following procedure. ・Shimano A Front side: Washer thickness 1.0mm → Bearing thickness 2.0mm Head side: Bearing thickness 2.0mm → Washer thickness 1.0mm → Adjustment shim thickness 0.1mm (Adjust presence/absence according to individual differences) (If you use your original size bearing with a thickness of 2.5mm, use washers with a thickness of 0.5mm on both sides) ・Daiwa S Please check the image for Daiwa S. ● Included items ① ・Bearings (inner diameter 4mm, outer diameter 7mm, thickness 2.0mm) 2 pieces ・Washers (inner diameter 4mm, outer diameter 7mm, thickness 0.5mm) 3 pieces (Inner diameter 4mm, outer diameter 7mm, thickness 1.0mm) 3 pieces ・Adjustment shims (inner diameter 4mm, outer diameter 7mm, thickness 0.1mm) 2 pieces (Inner diameter 4mm, outer diameter 7mm, thickness 0.2mm) 2 pieces ・Resin collar (inner diameter 4mm, outer diameter 7mm, thickness 2.5mm) 1 piece ・Shaft screw 1 piece ● Included items ② ・Resin cap 2 pieces (for spare) ・Maintenance wax beeswax 100% (Rub a small amount directly and wipe with a soft cloth until it shines) ・Resin washer (Please use for opening and closing the aluminum cap) ● Notes ⚠️ This product requires regular maintenance due to the natural finish of natural materials. Also, installation requires some assembly adjustment skills. ⚠️ Handle body and shaft are not included. ⚠️ The cap is made of aluminum alloy and will be scratched if you use a screwdriver. When tightening the cap, please use the resin washer included in ②. ● Other This product is handmade by an amateur as a hobby. Due to the handmade nature, there may be color unevenness, variations, scratches from manufacturing, dents, and knots in the wooden parts. Also, the texture and color may differ between the actual product and the image due to the shooting conditions and the environment in which you view it. Please understand the above before considering purchasing.