★ Original PVC Blinds ★ ★ Slat Width: 25mm, Width: 140cm x Height: 150cm ★ ★ Wood-Tone Blinds ★ Color Name: Oak (Embossed Finish) ★ Size Customization and Curtain Rail Installation Also Available ★ + Product Features + ● Plastic (PVC Resin) Slats ※ Inexpensive, lightweight, scratch-resistant, and elastic, making them quieter than aluminum blinds. ● We will cut the blinds to fit your window frame size [Additional Charge: +1600 yen per unit] ※ We cut to the centimeter for both width and height. [ Minimum Width: 36cm / Minimum Height: 31cm ] ● Comes with a 1-year product warranty and support for peace of mind. ※ Warranty does not cover discoloration or deformation due to aging of slats and cords that are subject to wear and tear. Some cases may incur charges depending on usage. + Product Description + [Slat Width] 25 mm [Size] 140 x 150 cm ※ Customizable for widths from 121cm to 140cm and heights from 101cm to 150cm. [Color] Oak (Embossed Finish) ※ Colors may appear differently depending on your screen settings. [Material] PVC (Polyvinyl Chloride Resin) [Accessories] Main unit, mounting hardware, mounting screws, tilt rod, curtain rail mounting bracket, bottom rail fixing device, instruction manual, warranty card. [Operation Method] Cord & Rod System ※ Right side: Lifting cord / Left side: Angle adjustment tilt rod (operation wand) [Cannot be changed to left/right] [Shipping Time] Approximately 1-2 weeks [Shipping Method] Sagawa Express ※ Additional charges may apply for intermediate delivery to Okinawa, remote islands, etc. + Notes + ● For installation inside a window frame, please order with a width 1cm less than the inner window frame dimensions. ● The lifting operation is a simple cord pull. The blinds may not fold perfectly horizontally depending on how the cord is pulled, but this is not a defect. It can be resolved by adjusting the way the cord is pulled. ● When installing on a curtain rail, please check the load capacity of the mounting location. ● The stated height is the total height of the product including the headbox, not just the height of the slats. ● If the installation area exceeds 1.6 square meters, the weight may be considerable, making it unsuitable for locations where frequent lifting and lowering is required. We recommend dividing the installation into two units, each not exceeding 1.6 square meters.