#SPIGICCHO #Hand Spear Fishing Tools This is a conical 64 titanium choke spear tip. There are two. This is an improved version of the choke spear tip that was previously listed. The changes are as follows: First, the taper from the tip has been made longer and sharper to improve penetration performance. Second, the diameter of the hole for inserting the push rod has been increased by 0.01mm and the depth has been increased by 0.6mm to improve straight-line stability and make it easier for the spear tip to come out. Third, the side hole of the choke spear has been changed from the conventional 2.5mm to 2mm to increase the strength of the spear tip itself. Please see the photos after photo 2. You can compare it with the previous spear tip. With these changes, I feel that the penetration performance when fired at the limit of the range is higher than the conventional one. The total length is 10cm, which is a long type, so it is the perfect spear tip for migratory fish. To be honest, it has more advantages than a 3-sided cut. 3-sided and 4-sided cuts increase the chance of the fish coming off by tearing the flesh due to the fish's thrashing after being caught. There is no chance of the fish coming off due to tearing from the cut. And I recommend using this spear tip with a stainless steel push rod. Titanium push rods are too light, which can throw off the balance of the spear and make the tip lighter, which can prevent penetration. If you use Dyneema line, you can use 1.8mm thickness with some ingenuity. However, I think 1.6mm is easier to use. Spear tip size Diameter: 7mm Hole diameter: approx. 5.06mm Total length: approx. 10.0cm Weight: 10g #Hand spear #Underwater gun #Yas #Speargun #Spearfishing #Omer #Picasso #omer #Picasso #Spear #Fish spear #Skin diving #Free diving #spear #spearfishing #SNOKEL #Fish spear #pole spear #Free diving #Skin diving #speargun #alien #Salvimar #Cressi #Cressi #Mares #Mares