This is a completed garage kit of "Mashu (Reverse Bunny Version)" by the dealer "APFSDS" . I wanted to paint a slightly sexy kit, but when I finished it, it had quite a presence and I couldn't display it proudly... I decided to put it up for sale because it's a shame to just put it away. Note that the three hearts cannot be removed, so it should be safe? However, I may withdraw it if there seems to be a problem. ・This is a garage kit. It does not have the strength of a PVC figure, so it is for those who are familiar with handling them. ・What will be sent is everything in the 10th photo. I will disassemble and pack it like this when I send it. ・It is possible to reassemble it as shown in the 8th photo, but some dexterity is required for assembly, such as incorporating the frill parts of the waist, so please be careful if you are not familiar with handling garage kits. ・I made it through the processes of surface treatment, washing, primer, surfacer, and painting. It's been a while since I made it, and my memory is vague, but there were air bubbles on the skin, so I think I lightly sprayed white, then put clear coat, and then painted with a surface-less color. ・I painted it to my liking, so the colors are slightly different from the examples. ・The skin, hair, tail, and frills are matte, and the other clothes, eyes, and mouth are glossy. I put blue pearl on the clothes and clear coated them. I haven't polished it, so it has a slightly glossy texture. ・Due to the aforementioned frill removal, both legs are not glued. The left leg is connected with aluminum wire and a magnet, and the right leg is connected with two magnets, but the parts are heavy and tend to come off easily. You can also glue them in either form, so please consult with me if you wish. ・As shown in the 9th photo, there were ribbon parts, so you can replace them, but the tie is a little difficult to remove, so please consider the ribbon as an extra. ・This was made by an amateur as a hobby, so there may be some imperfections such as dust, parting lines, and incomplete air bubble treatment. Please be aware of this if you are looking for a perfect finish. ・The parts are firmly glued, but if they come off or are damaged during transportation, please repair them yourself. Especially the base of the rabbit ears is very thin, so this is for those who can fix it even if it is damaged. Please confirm the above, and if you like it or if you can display it proudly, please consider purchasing it. If you have any other questions, please feel free to comment.