Switch for easily turning LED lights on/off using a vacant channel on a radio control receiver ■ Plugs into a vacant CH of an RC receiver, and turns the power supply ON/OFF via a toggle switch or volume control assigned to that CH. ■ Outputs the same voltage as supplied to the receiver when the switch is turned ON. ■ Input: 4.8~7.4v Output: 4.8~7.4v Maximum current: 2A Weight: 7g ■ Input cable: 21cm Output: 20cm ■ The ON point is at the stick position of 70-80%. It will be OFF at the 100% position. When assigning to a toggle switch, adjust the ON position by setting the travel amount.