Saint Christopher badge, new. In Europe and America, it has been popular since ancient times as the patron saint of travel and traffic safety. It can be attached to the head tube or seat tube of a bicycle frame with strong double-sided tape. Made of soft metal that can be bent by hand. Can be installed on both flat and curved surfaces. 32mm long, 30mm wide. In German, it says "gott schutze dich" (May God protect you). Please note the following points when installing: ・Be sure to remove dirt and oil from the surface to be attached using a cleaner, etc. ・When using on a curved surface, bend it beforehand to the same degree or slightly tighter before attaching. If the badge is attached to a curved surface while flat, the edges will lift. Be sure to bend it first. ・If the edges lift after installation, press them down with plastic or a piece of wood. Be careful as pressing too hard may cause dents. ・Using double-sided tape on vintage vehicles is not recommended as it may affect the paint. Free shipping. Shipped via Rakuraku Mercari Bin (Kuroneko Yamato).