Released September 5, 2025 Starbucks Reserve Silicone Ice Mold Barrel "An ice mold that makes round ice with the Starbucks Reserve logo" Size (width x depth x height): 7.3 x 7.3 x 8.5 cm Material: Silicone rubber [How to Make Ice] 1. Firmly combine the top and bottom parts of the mold, and pour water from the hole in the top, filling it to just below the brim. 2. Place in the freezer and wait until frozen. (Below -18°C, about 12 hours) 3. After taking it out of the freezer, let it sit at room temperature for about 1-2 minutes, then twist the mold to remove the top part. 4. Push out the ice from the bottom. Please be careful as dropping the ice too forcefully may damage the glass, etc. ⚠️Cannot be used in microwave ovens or dishwashers. This is a new, unused item, but please refrain from purchasing if you are concerned about initial scratches or are overly sensitive. Also, please purchase only if you understand that it has been stored at home.