Purchased on March 9, 2025. I am selling this item as I have no use for it. Retail price: 5170 yen This is a tool for tightening bolts and nuts to the appropriate torque. It is a useful range setting for maintaining bicycles and motorcycles. It is a preset type that notifies you with a slight shock and a "click" sound when the set value is reached. You can set the torque value by turning the grip. Product Specifications ・Total length: 275mm ・Weight: 570g ・Setting range: 5～25Nm ・Minimum scale: 0.1Nm ・Accuracy: ±4% ・Drive size: 3/8DR (9.5mm) ・Gear count: 24T ・Accessories: Dedicated case Notes ※Be sure to check the proper torque value for bolts and nuts in the maintenance manual, etc. ※Always use within the setting range. ※When the torque is low, the shock and sound are extremely small, and there is a risk of over-torque without noticing the shock, so be very careful. ※Even if you lock the lock dial, the grip may move, so use it with caution. ※Do not use as a ratchet handle, spinner handle, or hammer. ※Do not insert pipes, etc., and extend for use. ※Avoid using extension bars and conversion adapters as much as possible, as they can cause errors. ※Reverse rotation (counterclockwise) cannot be used. ※After use, be sure to set it to the minimum value of 5Nm and store it in the dedicated case. ※This product cannot be calibrated.