Excellent condition. Purchased 5-7+ years ago, hardly used. There are no scratches on the shaft or ferrule, but as shown in the photos, there are very slight scratches on the shaft ring and a slight warp, although I think it's at a level that doesn't affect use. Shaft: Adam Solid12MAX 3/8-10 joint, Musashi ring Recent retail price is over 50,000 yen! With joint cap (not original) ＜Manufacturer's Comments＞ The base material is made by cutting hard maple at 30 degrees and laminating 12 pieces, and the tip is processed in a manner similar to A.C.S.S. The base is the "Adam PRO taper." Feel: H, Deflection: A+, Power: B * ABS resin is standard for the ferrule. * Impressions may vary depending on the material of the tip and ferrule, the way it is struck, and individual sensitivity. * There may be some individual differences in the materials. * Feel, deflection, and power are based on our original taper comparison. Ferrule diameter: approx. 13mm Shaft butt diameter: approx. 22mm Weight: approx. 110g Please consider this as an approximate measurement, as it was measured with a home measuring device. As it is an old shaft, there may be unnoticed scratches or dents. I would like to sell it to someone who understands that it is a used item. Thank you for viewing.