ITALY Split Leather Gray Color Italy 2 sheets This is gray split leather from Italian leather. Please note that there is no grain (surface). This is split leather, a byproduct of finishing leather. There may be thickness variations of about 0.2~0.3mm. Please refrain from purchasing if you are looking for a perfect product. ※Has wrinkles. ※There is sun damage on the edges. ※There are scratches and scuff marks. ※There are dark (black) marks and scratches. ※The color of the front and back sides are different. Large-sized cuts. ① Width is about 20cm Length is about 75cm measured in the middle. Thickness 1.1~1.5mm ② Width is about 19.5cm Length is about 60cm measured in the middle. Thickness 1~1.2mm Dimensions and thickness may vary depending on the location. Purchased near Asakusa, this is split leather produced when skiving a single piece of leather. I usually use it as a core material. Because it is originally vegetable-tanned leather, it can be glued and cut, and even if the core material appears at the cut edges, it can be polished together with the surface leather, making it easy to use. I use it for reinforcing the back of root leather, adding bulk to parts, and when I want to make the core of a handle out of leather. In addition to natural leather, it is originally the back side, so there may be small scratches. It will be folded and shipped in an A4-sized box. Thank you.