3D printer Clone Prusa i3 MK3S Baer. I am selling it because I am replacing it. It can still print. I will include many spare parts (last photo). The outer wooden frame and plastic plate enclosure are not included. This is a defective item, so no claims or returns are accepted. 【Reasons for Defect】 ・The filament runout sensor does not respond. I didn't have any particular problems, so I used it as is. I will include a spare, unused sensor. ・There are cracks and glued areas in some parts of the electrical circuit box. The wiring for the build plate has been reinforced with silicone adhesive. ・Sometimes the temperature is unstable in the winter. It may be due to the outside temperature or poor contact with the temperature sensor, but it is unknown. 【Specifications】 The MK3S Baer 3D printer kit, with a height of 459mm, has a Z-axis that is 10cm taller than the original Prusa MK3S 3D printer. However, the current firmware is the standard version, so a stopper has been installed to limit the range of motion. Build size: 25x21x31cm Nozzle diameter: 0.4mm Filament diameter: 1.75mm