This is the monitor stand that comes with the EIZO FlexScan EV2480. - Quick release mechanism - Smooth height adjustment: Easily change the height with one hand. - Wide range of motion: The screen can be lowered to a very low position (convenient for placing it above a laptop). - Stability: The base is heavy, so the monitor doesn't shake easily from typing vibrations. I used it for a few weeks and then switched to a monitor arm, so it has been stored at home. It will be shipped in the shortest fixed position. ※ Regarding use with other company's monitors According to Gemini, it seems that it can be attached to monitors that support the VESA100 standard, even if they are not EIZO monitors. (Unverified. Please do so at your own risk.) ▽ From Gemini: ・ If you remove the silver plate with the claws (quick release part), the VESA standard screw holes will be exposed. ・ Monitors weighing approximately 3.4kg to 4.0kg are optimal. If it's too light, it will bounce up, and if it's too heavy, it will sink down. ・ Since EIZO screws may be special, it is safer to prepare general-purpose screws of about **"M4 x 12mm"** when attaching it to other company's monitors. ・ If the screw holes on the back of the monitor are deeply recessed, the stand may physically interfere and not fit.