Galaxy S25 Ultra Film This is a clear, glossy soft film. It's a soft film that applies using a spatula, resulting in a very clean finish. It's thin, durable, and elastic, absorbing impacts. It's much thinner than glass, so it doesn't interfere with cases. If you're looking for other types → #kiriGalaxyS25Ultra Compatible models: Galaxy S25 Ultra 5G (SC-52F, SCG28) Accessories: Wet sheet, dry sheet, dust removal sticker, application spatula, video QR code ★ Immediate purchase without comment is OK. Silent purchase after purchase is also OK. ★ Regular mail delivery is currently not available on weekends and holidays. For those in a hurry or who prefer anonymity, we offer Mercari delivery for an additional 100 yen, so please contact us before purchasing. ■【Tips for Application】■ The film structure is as follows, from top to bottom: Top layer: Film protection sheet Middle layer: Film body Bottom layer: Adhesive protection sheet for the film body (white) Sheet ①: Sheet ① protecting the surface for temporary application 1. Clean your smartphone screen. Remove any holes for the film's lens, etc. 2. Peel off sheet ① and align it with your smartphone. This is a temporary application. It's okay if air bubbles get in at this time. You can reapply it as many times as you like. Reapply as many times as you need until you are satisfied. ★ This is where the quality changes ★ You can touch the adhesive side of the film with your hands at this time. 3. For the actual application, lift the film from the bottom of the smartphone (USB port side) about 5cm and peel off the bottom layer sheet while applying it with the spatula in one go. No force is required. 4. Raise the remaining bottom (white) sheet on the opposite side to 90°. At this time, it will feel like you are also peeling off the temporarily applied area. 5. As before, peel off the bottom sheet while applying it with the spatula in one go. 6. In this state, finish the four sides of the smartphone to some extent with the spatula. First, apply the edges outward. Apply straight along the edges of the smartphone later. Doing it first may prevent air bubbles from escaping. 7. Finally, pinch the top of the lens and peel off the top layer sheet, and you're done. 8. Even if there are streaks of about 3cm on the film, they will disappear over time. Please refer to the video as well.