This is a cable made with a TATSUTA (formerly Tachii) TPS7222 and an Amphenol gold-plated phone plug. Many players who don't move from their position, such as those using tuners or boards at their feet or soundboards at hand in venues, requested a length of "3m is too much," so this cable is approximately 2.4m, which is considered just right. It's also recommended for home and recording use. Almit solder was used to take advantage of the cable's wide range. The red tube at the end indicates a connection where the cold and shield are grounded, while the green tube indicates a connection where only the shield is grounded and both cores are connected as hot. According to theory, the 2-core hot cable is slightly thicker and has a lower frequency response. You can try them out to match your instrument, pedals, and desired sound. These two cables were used for trial performances in the production studio and are in good condition as they haven't been taken out. If you only want one, it will be 2,000 yen. Please let me know in the comments section.