・ This is a CR-D1SEmkⅡ, a tuned version of the ONKYO CR-D1 by the audio specialty store, Yoshidaen. ・ For this listing, the tray belt, pickup, and speaker relay have been replaced with new ones. The relay used is the original F4AK009T. ・ The rear terminals were tarnished and made it difficult to insert cables, so each one has been polished to remove the tarnish. ・ Currently, CD playback is good, sound output is good, and there is no display brightness degradation, which is common with this equipment, so you can use it comfortably. ・ Before listing, I checked CD playback, each input, sound output from the subwoofer, FM reception, and the behavior of the remote control. ・ Tone control, Bass, etc. are also normal, and you can enjoy clear and powerful sound tuned differently from standard equipment. ・ Recording has not been confirmed, only the above checks were performed. ・ There are some scratches due to the product being used. Since the original unit had many scratches, the chassis has been repainted with a similar paint to make the scratches less noticeable. I personally think it has improved considerably from the original condition, but please refrain from purchasing if you are concerned. The CR-D1SEmkⅡ sticker is badly stained and torn, so I removed it (Image 9). ・ As an accessory, the standard remote control RC-662S is included. This listing includes only the main unit and the remote control. The remote control is slightly sun-faded. Batteries cannot be shipped via courier, so please prepare two AA batteries. The following is a quote from Yoshidaen. Note that options such as a master clock are not included. CD/Receiver ONKYO CR-D1SEmkⅡ Although it is a very affordable price, the configuration is clever and motivated Yoshida. In order to make the most of this price, we refrained from replacing the master clock and put effort into key areas, resulting in careful modifications. The vibration system and ground of the amplifier have been reviewed from scratch. SE cables, which are a characteristic of the SE series, are used in the output stage. In addition, SE cables are lavishly used between the pre-power stages. The mechanism also responds to vibrations and controls them. With its highly-regarded drive capability and excellent sound clarity, it will firmly drive speakers that are two or three ranks higher than its price range. Since it is also listed on other sites, please comment before purchasing.