This is a stand for 1/6 scale dolls. The base has a pink cat-paw design. The contents are shown in photo 4. *Unlike the previously sold version, the rod is made of metal instead of acrylic.* The base is 11cm wide. The stand is adjustable as shown in the photo, and can be extended from 9.5 to 16.5cm. The base is 1.5cm thick, so the length will increase if you are posing the doll without attaching its feet to the stand. The acrylic plate on the base will be delivered with a protective sheet attached, so please peel it off as needed. *Photo 3 shows the state after removing the protective sheet.* The protective sheet may have been reapplied or the bag may have been opened for inspection. Thank you for your understanding. The rod that inserts into the base is quite tight, but it can be inserted by turning it. *It is not the type that is inserted all the way in, so there is no need to force it in deeply. If it still doesn't fit, you can make it easier to insert by sanding the insertion part of the stand rod little by little.* Of course, it can also be used for figures other than dolls. If there are any remaining in stock, please contact us if you need more than one. #1/6 Doll