● Size (Approx.) 400mm (Head diameter (approx.) 16mm / Driving part diameter (approx.) 9mm) / Weight: (approx.) 200g ± 5g per piece * Due to the process of manufacturing, there may be a size difference of up to 10mm when the tip is shaved. ● Material / Material Steel / Surface treatment: Spray electrostatic powder coating ● Set contents Steel pegs 40cm set of 4 (with caps) ● Product Description These are strong steel pegs that are useful for setting up tents and tarps. Have you ever had experiences like "They were thin and broke easily" or "They didn't stick into the ground well even when hit with a peg hammer" or "They were blown away by the wind" when using the pegs that came with your tent? With sturdy original steel pegs, you can secure them firmly. The hook part is laser welded and integrated without gaps. You don't have to worry about them coming off after using them several times. Furthermore, a special wire drawing process compresses 10mm steel to 9mm, achieving high strength. There is no need to worry about the pegs bending due to low density. The head is an easy-to-drive cylindrical shape with a diameter of 16mm and a thickness of 5.2mm, and the hook is extremely thick at 3.2mm, making it hard to deform and sturdy. Each steel peg comes with a cap, so you can use it safely and securely without worrying about piercing your camping gear or storage bag. The pegs are coated with a spray electrostatic powder coating that is highly rust-resistant. This involves the extra step of electrostatic painting and heating to harden it. This provides both high rust resistance and durability. In addition, this coating uses environmentally and body-friendly paint. Please note that due to the manufacturing process, the inside of the holes is not painted. The peg holes on the hook are made larger, so you can easily remove them by inserting another peg into the peg hole. Pegs 40cm Strong Steel Pegs Camping Tent Tarp Setup Laser Welding Wire Drawing Rust-proof Coating Safety Cap Included $$1000