Thank you for viewing! This is a set of silicone tubes for wacky/neko rigs, specifically for Spatula 7.8 (Nagasupa) and 4-inch Yamamoto Senko worms. Everything in the first photo is included. Compared to heat shrink tubing, there's no need for cutting or using a lighter. You can use them simply by inserting them. For Nagasupa, you can easily insert the tube by gently pulling it over the head. The fit for the 4-inch Yamamoto Senko is tight, but by carefully inserting it from the thinner tail end to avoid tearing the worm, you can set it up to the middle or the band area. By using thick silicone tubes, the hook holds better compared to neko/wacky rigs with direct hook insertion. It fits perfectly for Nagasupa, preventing the worm from slipping off, and fits snugly on the 4-inch Yamamoto Senko, allowing for lively action while minimizing worm damage. The tubes are handmade and hand-cut, so there may be slight variations in width, but they should function without any issues. You can also use them by cutting them in half as shown in the 11th photo. As a bonus, I'll include one new tube-equipped Nagasupa and one 4-inch Yamamoto Senko. In addition, they can be used with worms of similar thickness to Spatula 7.8. There are 20 pieces in total, plus one extra. Size: Inner diameter 7mm / Outer diameter 10mm, Width approx. 8mm. Please check the photos. Tube Material: Silicone Number of Tubes: 20 + 1 Since these are handmade, please refrain from purchasing if you are concerned about the condition. Also, please refrain from returns or complaints. 【Request】 Negotiations for price reduction via the "Request Price Reduction" button may be accepted depending on the product, but direct price negotiations in the comment section will be declined. Fishing Type: Lure, Black Bass, Bass Fishing #Issei #GaryYamamoto #BassFishing #BassFishing #Worm #StraightWorm #Spatula #Spatula7.8 #YamamotoSenko #Senko #Nagasupa #YamamotoSenko #NekoRig #WackyRig #WackyTube #Silicone #SiliconeTube #SiliconeRing #SiliconeBand