The lever cable for RAP has been modified to connect to a button. It is possible to make it a jump button lever. Since the GND is taken from the lever, it can be easily connected. Connect to the jump button as shown in photos 2 and 3. You can disable the up direction of the lever and set jump to a button. [Hold down input → Release jump button → K button] allows for a fast TenShoKyaku (rising kick). [Down input] ↓ [Simultaneous input of jump button and down input] N [Releasing the jump button results in only down input] ↓ This is how it works. In addition to the advantage of being able to input N↓N↓ like a leverless controller, lever bounce and accidental jumps can also be prevented. [Compatible models for lever harness] RAP V3 RAP VX Other RAP series (Hayabusa, N, etc.) It can also be plugged into the RAP Hayabusa, but the length is probably not enough. The length of the lever cable part is 22.5cm. Please measure the length from the board of your RAP to the lever.