This item was stored after being used once for hub replacement. A set of tools that were purchased together at the time is included. Please check the details in the images. The Ω wrench is unused. The T-shaped wrench is for inner nipples. Please let me know if you don't need the lead sheet, case, etc. Regarding the truing stand, some rust has developed due to dust accumulated during storage. I removed some of it, but it's not completely gone. I tried to avoid scraping it as much as possible and mainly treated it with chemicals, but the rust spread, and there are areas that look like rust on unrelated parts. The original area of rust was small, and it's mostly on the plated surface, but I cannot rule out the possibility of further corrosion, so please understand this before purchasing. If you are concerned, you may want to apply a rust converter. The truing stand was stored with a cover, so the rust only occurred around the base. There is no rust on the functional parts, and the moving parts work without any problems, so there should be no issues with use. Also, please note that the black base at the bottom has been removed during the work.