・These are parts removed and saved from discarded ONKYO equipment. ・I'm not sure if there's a demand, but I'm listing them because I have too many and they no longer fit in a box. 　If there's demand, I plan to list more. 　I have quite a few, so if you need a large quantity, please inquire through the questions. ・They can be used to recover equipment with damaged or cut power cords. 　Also, they have been cleaned, so how about using them if you want to refresh a dirty cord? ・It's unknown what equipment they were removed from, but before listing, I confirmed that they powered on and reached the power-on state when connected to a CD player (C-705FX). 　It's the type that can be detached by removing the white connector's claws. Please refer to the first image. ・Please check the type of power cable connector of the equipment you want to replace by opening the chassis beforehand. ・From my memory, they can be used in the following systems: 　・INTEC205 series (A-905～A-905FX2) 　・INTEC275 with thin power cables (T-422M and MD-133) 　・FR series with thin power cables (up to NFR-7, cables are slightly thicker from 7X onwards) 　・CR-185 series ・If you are unsure if they can be used, please specify the model number and ask a question. 　I will answer to the best of my ability. ・Please note that the power cords may be secured with cable ties or have ferrite cores, which may require some effort. ・I am only listing clean cords, but please understand that I cannot accept requests for specific years. ・When replacing, always do so with the equipment's power cord unplugged.