Sold as a set of 2 (for 2 rods) This is a rod holder specifically designed for the popular "Docutte" tackle box. ◾️Important: Please check the size. Refer to the photos and confirm the dimensions of the "★" part of your Docutte to ensure the rod and handle do not interfere. There are two types of heights available: 45mm and 55mm. 45mm is recommended for the 4700 model. The holding part also comes in three types: "Square 40mm", "Round Diameter 36mm", and "Round Diameter 30mm", so please choose the one that suits your style from the available listings. ■Features The angle and length are adjusted to fit the side of the Docutte, so the rod can stand straight even if the side is slanted. It is designed to be attached to the short side, so it may interfere if attached to the long side. This is a handmade product made with a 3D printer. ◾️Changing the number of sets If you need to change the number of sets, please comment before purchasing, and we will change the price, etc. ■Materials Body: ABS Screws and nuts: Stainless steel ■Installation method Determine the installation position and drill a 3mm diameter hole in the Docutte body. Secure the rod holder body and the included spacer by sandwiching the Docutte wall with screws and nuts. Applying double-sided tape in between will further increase the strength. ※Important: Do not use tapping screws as they may damage the Docutte body. ■Notes ・It may break if heavy objects are placed in it or if strong force is applied. ・Do not use it for heavy-duty rods or heavy landing nets for targeting large fish. ・Be careful not to overtighten the screws when screwing them in. ・Please be careful not to get injured during the work. ・We do not accept discounts. Please inquire if you have any questions. We may not be able to answer some questions to prevent copies, but please understand. ・Product specifications are subject to change. ・The color may vary depending on the material lot. ・The box and rods in the photos are not included. Rod keeper Rod stand Rod holder DOCUTTE