Original Hook Keeper (No Tools Required) Uses ultra-hard 1.2mm stainless steel wire ⭐️How to Install Peel off the backing of the double-sided tape attached to the metal fitting and stick it to the reel foot (see image), then just set it on the rod. ★Basically, if the back of the reel is the same as or similar to Zillion Tatula, Steez and Alphas can also be installed. Note: Please confirm that there is a groove on the surface where the reel foot fitting is attached. (Approximately 5mm wide, 10mm or more in length) Shimano reels are not compatible. ★Since it is sandwiched between the reel foot and the reel seat, there is no looseness at all. ★When ordering, specify the left/right and the number of pieces, and I will change it to a dedicated page. Thank you for viewing.