Thank you for viewing. This is a Marshall HAZE40 tube combo amplifier. In addition to the photos, the standard foot switch and power cord are included. A speaker direct connection jack has been installed at the location circled in red in photo 8. This is a custom modification to allow for the use of an attenuator between the amp and speaker, or for use as a speaker cabinet. The jack is made by Switchcraft. Normally, as shown in photo 9, the 16Ω jack on the amplifier side and the speaker jack are connected with a speaker cable. The Belden speaker cable shown in the photo is included. The cable length is 1m. Both power tubes (EL34) have been upgraded from the standard ones to Groove Tubes EL34. The bias has been adjusted. The preamp tubes have not been updated. After purchasing it new around the release year (around 2009), I used it for live performances once a month and studio practice once a month for about a year. After that, it has been stored indoors. The following are the features, quoted from the instruction manual, page 41: "Developed and manufactured in the UK, this 2-channel valve amplifier is inspired by the British sound of the 60s and 70s, adding a modern edge to the classic Marshall sound. The 40W combo MHZ40C features a classic top-loaded 1x12" combo with a Celestion Marquee (G12-66) speaker, custom-designed in collaboration with Marshall, and includes an overdrive boost and series effects loop." The description states that it was manufactured in the UK, but it is actually India. The built-in effects are quite clean, in my subjective opinion. I feel that the reverb and chorus (switchable to vibe and echo) are good enough to use without connecting compact effectors. All switches and volume controls are working properly. An owner's manual with Japanese descriptions is included (photo 11). Shipping is included, so I will not be offering any discounts. Thank you.