This chassis is based on an MS Flex chassis and is equipped with mainstream gimmicks. It is a full carbon gimmick chassis with aftermarket matte carbon fiber finish. Details are as follows: Fluorescent yellow chassis specification Hashiwatashi (Bridge) "The front and rear centers are connected with split carbon fiber, preventing the center chassis from cracking. Insulated." Front AT Step-Down Slide Damper "This is a step-down slide damper. Thrust can be adjusted with washers, and the existing slide damper cover is installed. Please adjust the slide damper and apply catchers to prevent snagging. The roller screw heads are also hidden." 19mm Roller Dedicated Rear Anchor "This is a Sei-chan type anchor. It is for 19mm rollers only. Fine adjustments are required after installing the rollers due to the roller width setting of 104.8mm." F Angled Brake "Regarding the brake, it has been processed into an angled brake at the front. It can catch the track surface with a point rather than a line, so a significant deceleration effect can be expected. The rear plate has been countersunk for placing mass dampers." Front Lantern "It is a lantern combined with a multi-type, making it durable and preventing chatter." MS Flex "This is a normal center damping type flex. POM torque increase processing has been applied to the bridge construction. Please check the flex sales page for details." It is built on the premise of setting up Pera tires, so the front is raised 3mm and the rear is raised 3mm, and the underside is also raised. The front and rear units are reinforced with instant glue, and screws for the catcher damper are left. Please check the flex product page for flex specifications. It may be canceled as it is also sold on other platforms. Please understand. If you have any questions, please feel free to comment. Thank you very much.