This is an ultra-compact and lightweight foot switch (white) specifically for Strymon pedals, smaller and lighter than the original. Because it's very small, we recommend securing it with Velcro or similar. It has a tactile "click" feel, and uses a 3.5mm mini cable for connection. [What is a Favorite Switch?] This switch is used to create and recall one of your favorite settings. It allows you to switch between the current knob settings and your saved favorite setting, which is very convenient. It can be used with some Strymon pedals that have a favorite function but lack a dedicated switch. [Tested Models] BRIG, ULTRAVIOLET, cloudburst, El Capistan v1&v2, Flint v1&v2, SUNSET, DIG v1, DECO v2, BRIGADIER blueSky v2 (remote sw), IRIDIUM (remote sw), Riverside (boost sw) [Compact Type Specifications] Size: 40x30x20mm (excluding protrusions) Switch Height: Approximately 40mm Weight: Approximately 26g Case Material: ABS resin Included: 3.5mm TRS cable L-S (including 6.35mm adapter) [Notes] * Initial setup is required on your effector unit to use the favorite function. Please refer to your effector's manual for details. * Some models, such as El Capistan, have different setup methods depending on the firmware version. * This product only has the favorite function and does not have a Tap function. * Internal parts configuration and placement may change due to product improvements or the availability of parts. * The ABS resin case is prone to scratches, and may have storage scratches or scratches from the manufacturing process. * Each unit is handmade, so there may be slight individual differences in processing position, etc. * We always check the operation before shipping. * The switch body comes with a 6-month warranty. * If the included 3.5mm TRS cable is not long enough, you can use a commercially available mini stereo cable. * The effector in the image is not included. #strymon #ストライモン #フットスイッチ