Ultra-compact, soft-type momentary foot switch with left/right switch, passive, unlatch, normally open. The photos are samples, and the colors may differ from the actual product. If the momentary setting is not possible, chattering may occur, and it may not be controlled properly. e.g., Patch sending on BOSS GT1000core. BOSS RC series cannot be used because they are normally closed. Although it is new and unused, Please understand that there may be distortions in the hole processing, unevenness in the paint, chipping, scratches, and scribe marks due to handmade nature. The images are samples, and the paint unevenness of the actual product may differ. The paint will crack due to aging. This product requires a certain amount of knowledge to use, so please consider it as basically non-supported. We will check the operation before shipping, but if any defects occur, including initial defects, Due to shipping costs, we ask the winning bidder to make adjustments using a tester or soldering iron. Please note that the winning bidder will bear all costs for returns and repairs, including initial defects, including round-trip shipping and re-shipping. Please check if the product can be used by the winning bidder as it is a product with the above specifications. We will tell you about items with a proven track record, but please consider it as a reference only, as the manufacturer's specifications may change. Please refer to the photos for dimensions. The paint has a protective film, but it is not baked, so it is vulnerable to scratches. Also, due to the self-painting, there may be paint unevenness, lumps, and chipping. Passive, so no power supply is required. The foot switch is a soft type that supports rapid-fire use, such as with tap switches. How about as an expansion switch for Boss's ES-8, ES-5, MS-3, GT-1000, GT-100, GT-1, VE-500, KEMPER REMOTE, etc.? The toggle switch on the right side towards the back is the left/right switch. After installing the board, you can switch the switch (left and right for horizontal placement, up and down for vertical placement). Cannot be used as a latch or alternate switch.