Large buttons suitable for 3:3 configuration. Six peg buttons purchased for maintenance. These are surplus, so I'm offering them for sale. ※The images are samples. Please note that there may be differences in the length of the screws, washers, button shape, and color depending on the incoming lot. However, the shapes within a set are generally consistent. These are unused, but they are outlet items and may have scratches, dirt, rust, chips, peeling, paint lifting, uneven finishing, etc., from transportation, storage, and manufacturing. Please refrain from purchasing if you are looking for a pristine item. I find them useful because they are inexpensive and reasonably functional. There are various shapes of mounting holes, so compatibility with the shaft varies. We recommend using genuine manufacturer parts for peg button replacements, so returns are not accepted. Please proceed at your own risk. As advice, use the original washers and screws if possible. If they are not long enough, use the included screws or adjust the number of washers. Torque adjustment is essential by tightening the screws, but if the shaft shape and mounting hole are not tight, there will be play. ☆Suitable for both electric and acoustic guitars★ Screws and washers are included. 【Handling Precautions for Pegs, Peg Buttons, etc.】 ● Resin peg buttons are not as strong as metal ones, and may crack depending on handling, aging, or damage. Please handle them with care. Handle them carefully during installation. (Please be careful with the tightening of the mounting screws. Tightening too much may cause damage. Also, align the screw threads of the mounting screw and the shaft before tightening. Tightening when the threads are not properly engaged may damage the threads.) Peg buttons are stronger when thick and weaker when thin, so they are vulnerable to force from the vertical and horizontal directions depending on the shape. Please handle them with care. ● Also, the screw threads of the nuts, the screw threads of the buttons, and the mounting screws, including the screw heads, grooves, and resin buttons, are all delicate and therefore not very strong, so handle them carefully during installation.