Outdoor cat house. This is a set of items 35 and 36. Please be aware: * Most of the materials are recycled. * There may be scratches and stains due to the use of recycled materials. * This is a personal, amateur construction. * I have installed it under a roof, in a place that is not greatly affected by rain and wind, so I do not know the durability under other conditions. Structure: Two layers of styrofoam boxes made from waste materials, with an entrance hole. Exterior: Wrapped in vinyl. Interior: Lined with 3mm aluminum sheet. Rain protection: Plastic plates attached to the sides of the foam board. These will be detached from the main body for shipping. Please secure them with tape when using. Curtain: Bubble wrap. Bottom board: Foam board. Bedding: Padded, tubular, so it can be used as a cat futon with the fluffy side inside. Photos: 1st image onwards Overall/Front/Right side/Back/Left side/Top/ Bottom/Entrance/Inside/Bottom board/Bedding Amateur measurements (cm) Outer dimensions: Width 38 x Height 34 x Depth 43 Inner dimensions: Width 34 x Height 27 x Depth 39 Entrance: Width 14 x Height 16 Bottom board: Width 32 x Length 36 x Thickness 2 Bedding: Width 48 x Length 48