※ Brand new, unused. ※ Depending on the size after packaging, the shipping method may be changed between "Yu-Yu Mercari Bin" and "Raku-Raku Mercari Bin". ※Caution※Caution※Caution※ ・Although the images show compatibility with Switch 2, it has been confirmed that some consoles are rejected during device authentication and cannot be used, so the operation of Switch 2 is unknown. [Official HDMI cable recommended] [20.0V / 3.0A Max 65W output PD charger (official 60W or 65W or higher commercial products recommended)] ・Switch (including OLED) only supports "1080P 60Hz" ・Not compatible with Switch Lite. ・You cannot watch YouTube from the Switch through this product. HDMI cable compatible with Nintendo Switch: The Switch dock is compatible with Nintendo Switch. (Note: Only the docking station is included, and the charger is not included. We recommend using the official Switch original power adapter). PD 100 Smart Fast Charging: With the Switch TV adapter, you can charge your Nintendo Switch system in TV or tabletop mode. Built-in smart original chip, with short circuit protection, over power protection, recovery protection, and overheat protection. Steps to use the Switch TV dock: Required: Connect to a PD fast charger of 15V/3A or higher (If the power is insufficient, it will not function, such as not displaying on the screen.) 1. Plug the power and adapter into the TV's HDMI cable 2. Change the TV signal to the correct HDMI port 3. Wake up the switch and plug the adapter's USB-C output into the Switch console 4. Wait 2-8 seconds for the TV to turn on automatically. Note: 1. If insufficient power (e.g., less than 60W) is used, TV mode may not activate. We recommend using the original charger. Note: 2. In TV mode, the game screen will not be displayed on the Switch console screen, and the Switch console screen will turn black, and the game screen will only be displayed on the TV/monitor. Note: 3. YouTube is not supported.