【※Plate not included.】 This is an assembly for a Jazz Bass. Recommended for those who want to upgrade their current bass! Assembly Introduction 【Pots】 Entry-level basses, etc., have millimeter-standard holes in the plate. I considered CTS pots, which are famous for being good, but CTS are inch-standard and not compatible. Therefore, I chose Alpha pots, which are millimeter-standard and good. They are 250kΩ, a model that works well with basses. You can install them directly on your existing plate. This time, I made them with full-size pots. 【Jack】 The jack is made in Japan. The quality is quite good, and I feel it's not much different from Switchcraft. 【Wiring】 The wiring is cross-wire, which is also used in Fender and other high-end guitars. It's quite stiff and sturdy, so there's no need to worry about durability. ※Cross-wire will be either skin color or yellow. Basically, it's made in skin color, but it may be yellow. Please understand that there is no change in function. 【Capacitor】 The capacitor is the classic good-quality Orange Drop. Specs → 200V 0.047uf Even when the tone is applied, it doesn't sound muffled, and the sound has a clear core. As described above, I have paid close attention to the quality. All items are new. All pots have noise reduction grounding, so there is very little noise. Please feel free to upgrade. Please refer to photos 3 and 4 for pickup wiring methods and pot dimensions. Power-on confirmed. Shipping will be via Yu-Yu Mercari Mail A4 size brown envelope. If you are worried about wire breakage, etc., I will send it via Yu-Yu Mercari Mail Yu-Packet Plus for an additional 200 yen. I have kept the price as low as possible, so I cannot lower the price any further. #Bass