Clearance sale! I build amplifier and speaker cabinets in my spare time, alongside my main business of furniture making. I select SPF lumber with few knots and use high-quality lauan plywood for the back panel. It's a 10-inch cabinet, but I think it has a powerful sound that rivals a 12-inch. I recommend ceramic speakers. Speaker: 10-inch specification Body: SPF lumber (15mm thick) Back panel: Lauan plywood (15mm thick) Grille cloth: Wheat Baffle board: MDF (12mm thick) Speaker mounting screws (4-point, 5x20 truss head screws included) Speaker mounting screw position (244mm) Wiring: Switchcraft #11 mono phone jack, shoulder-type insulating washers, plastic insulating washers, jack plate (may have scratches even if new), BELDEN 9497, Faston terminals (Audio-Technica TL205M, male side 5.2mm), Kester 44 solder used Rubber feet: Commercial product Paint: Oil stain (oak color), urethane sanding sealer base coat, urethane half-flat finish Dimensions: W450 x D230 x H360 (including 10mm rubber feet) Weight: 5.25kg I put in the effort to build it carefully, so it has a solid construction, which also affects the sound. I hope you enjoy using this cabinet as a base and experimenting with it, such as adding sound-absorbing material or changing the speakers and wiring, while searching for your favorite sound. The grain is continuous because the boards are assembled in order. The older growth rings (the outside of the tree) are on the outside of the cabinet, just as they were when the tree was alive. The body is joined using half-blind dovetail joints. I try to be as careful as possible in the manufacturing process, but there may be scratches, dents, warping, chips, cracks, color unevenness, paint unevenness, and speaker mounting marks, so please judge from the photos. This listing is for the cabinet only; speakers are not included. Shipping will be via Yamato Transport (cash on delivery, bring-in discount). I try to ship as quickly as possible.