Please read the following description and profile. [Manufacturer] BUSKER'S [Model Number] BST-2H/FM [Condition] Used [Accessories] None (body only) ・Specs [Body] Basswood (Flame Maple Laminated) [Neck] Canadian Maple [Fingerboard] Rosewood [Pickups] Wilkinson [Nut] Bone [Controls] 1Vol, 1Tone, 5-way switch, Coil tap switch This is a BUSKER'S guitar. Current setup is as follows: String height is set to approximately 1.3mm for the 1st string and 1.6mm for the 6th string. The neck is set to a slight back bow, and it has been confirmed that the truss rod can be turned approximately 80-90 degrees in the tightening direction from that state. Each pickup, pot, and switch have been confirmed to be functioning normally. Nut height and fret height are also not a problem. There are dents and paint chips on the lower side of the body. Other parts have no noticeable scratches, but there are playing scratches and scuffs that do not appear in the photos. The pickups are Wilkinson, which are famous as replacement parts. The rear pickup can be coil-tapped with a switch. When shipping, the strings will be removed, and the neck and body will be disassembled and packed separately. Please be aware of this beforehand.