○ Product Description This is a tilt stand specifically designed for the Elecom Trackball EX-G PRO (M-XPT1MRBK). It is a handmade product created using a 3D printer. Tilting the trackball reduces wrist strain. The tilt angle is 20°. The height from the floor to the tip of the ball is approximately 71mm. ○ Features The stand is secured to the trackball by replacing the battery cover. The stand will not fall off even if you lift the trackball. You can access the power button and ball removal port with the stand attached. Rubber feet are attached for non-slip and stable use. The standard battery cover and USB dongle can be stored inside the stand. ○ Additional Information Please follow the assembly instructions (see images). Installation is not possible using any other procedure. When attaching to the battery cover, press in the tabs. Forcing it on without pressing the tabs may cause damage. The rubber feet are checked for levelness, but there may be wobbling depending on the installation environment. In that case, please remove the rubber feet and adjust by adding double-sided tape in between. 3D printed products have different appearances one by one. Although there may be streak marks or stringing, we sell products after confirming that they do not cause any problems during use. We will ship anonymously via Rakuraku Mercari (Yamato Transport). We do not offer price reductions, so thank you for your understanding. ○ Specifications Printing Method: Fused Filament Fabrication (FFF) Material: PETG (body), rubber (anti-slip) Body Color: Black Weight: Approximately 39g