JA Series Shift Pattern Oil Change Plate Wood Japanese Pagoda Tree (Enju) JA Series Jimny New Jimny etc. Shift Pattern / Oil Change Plate This is sized to be installed around the shift knob. Also, if you have a shift knob or transfer knob without pattern markings, this plate will allow you to pass inspection. If you have other requests, such as wood type, model number, markings, or fasteners, please let me know. For the JA11, it can be inserted into the location where the vinyl shift and transfer instructions are attached. For other models, if it's difficult to insert, please attach it with adhesive or similar. You can choose from the following fasteners for the two attachment points: Brass eyelets, spring snaps, gold-colored spring snaps Beeswax oil finish ・Approximately 100mm wide x 130mm long x 4-5mm thick This is a panel made using fine wood. Because it is natural wood, warping may occur. Double-sided tape is not included, so please prepare your own. Please understand and confirm before purchasing if you are concerned about these points. Returns and exchanges are accepted for initial defects.