✨ Energy-saving lighting for general households. For crime prevention measures! Halogen sensor light Water-resistant M-1150 This is a new, unused item, but it has been stored in a storage shed for a while, so I have checked its operation once. There were no problems. The outer box is dirty, please understand. With instruction manual Recommended installation locations: 1. At the entrance light or back door of your home, where you want a little light. 2. Install it on the outer walls or balcony of your home for crime prevention. In your home's storage shed or warehouse. 3. In the garage for taking cars in and out at night. 4. At the entrances and exits of offices, stores, factories, warehouses, etc. 5. Other places where it is necessary for crime prevention. Below is the manufacturer's description ⇩ Product Information For energy-saving lighting and crime prevention! Water-resistant sensor light ● The sensor detects people or cars, and the light automatically flashes. ● Water-resistant, so it can be installed outdoors (under eaves, etc.). ● Uses a halogen bulb, so it is very bright and effective for crime prevention. ● Lighting time can be set (approximately 15 seconds to 5 minutes). ● Automatically turns off after the set time has passed. ● Can be installed on concrete walls with the included anchor lamp. ● Uses Nichira infrared sensor. Specifications ■ Voltage/Frequency: AC100V・50/60Hz ■ Power consumption: 150W (1W standby time) ■ Bulb used: Halogen bulb 150W (included) ■ Sensor detection method: Pyroelectric infrared detection method ■ Sensor detection range: Approximately 3-12m (sensor angle approximately 10-15° / when installed at a height of approximately 2.5m) ■ Lighting time adjustment: Approximately 15 seconds to approximately 5 minutes Cord length: Approximately 3m ■ Weight: Approximately 725g ■ Accessories: Wood screws x 3, anchor plugs x 3, 150W halogen bulb, instruction manual Thank you very much ^_^, ‼️