This is an ABR-1 bridge made by Kluson, famous for their pegs. Nickel-plated, non-wired, with brass saddles. This is a new item, with the saddles converted to flat-head and pre-grooved, so it's ready to use immediately and will last for a long time. It's an inch standard, so it's Gibson compatible. About Flat-Head Saddles: These saddles were used from around the time the ABR-1 became wired until the Nashville bridge was adopted. Because the contact area between the strings and the saddle is increased compared to sharp-head saddles, the high frequencies are suppressed, so when placed on a Flying V or Firebird, the unpleasant high frequencies disappear, and the sound becomes thicker and sweeter. It's also recommended for those aiming for a 60s-70s sound on a Les Paul or SG. If you're not satisfied with pickup replacements, please try paying attention to the bridge and saddles. You'll notice a significant change♪ Vintage Maniacs previously published a feature article, which is also interesting, so please take a look. Reference Price: Vintage Maniacs flat-head: 22,000 yen (currently sold out) #gibson #fender #PRS #Epiphone #zemaitis #ESP #Gretsch #Rickenbacker #Suhr #tokai #Fernandes #Fujigen #Greco #electricguitar #guitarrepair #guitarparts #guitarcraft