The frets have been replaced with new medium-sized frets. The neck is straight, and there is still room to adjust the truss rod. The nut and tuners are not included, as these are a matter of personal preference. This is a Squier neck purchased around the year 2000. It has a fingerboard with a rounded profile, which some people may find easier to grip. The seller has short fingers and found this neck very comfortable to hold. It is made in Japan, so it may be somewhat rare. If you prefer a low string height, the open strings may buzz against the first fret. In this case, you can raise the nut or slightly file down the first fret to adjust it, which often resolves the issue. Another effective method is to add a hard-type instant adhesive to the grooves where the strings sit in the nut to raise them. The width is 56mm. It comes with a serial number. The item is only the neck itself, without a box or manual. It has been cleaned with alcohol. Please refrain from purchasing if you are overly concerned about minor imperfections, as this is a used item. Thank you. This is a high-quality neck for a Squier Stratocaster Silver Series, designed for Stratocaster guitars. - Brand: Squier - Model: Stratocaster - Series: Silver Series - Neck Type: For Stratocaster - Condition: Used Thank you for viewing. #Fender #Vintage #Japan #Refret