■ Teruha and Nuts Keycap ① ■ ---✃-----✃✁✃-----✁--- 【Compatibility】 Cherry MX switches, Cherry MX compatible switches (Key switches with a "cross-shaped stem," mechanical keyboards, gaming keyboards) 【Incompatibility】 Membrane keyboards, scissor-switch keyboards Key switches that do not have a cross-shaped stem Low-profile switches such as Choc v2 (Even if the stem is cross-shaped, it may not be usable due to interference) 【Profile】 Sculpted type OEM R1 equivalent (Esc, number keys, f-key height) 1u 【Size】 18 (width) x 18 (depth) x 19 (height, at the highest point) *Approximate measurements. ---✃-----✃✁✃-----✁--- □ Due to slight variations in the thickness of the cross shape depending on the switch, you may feel looseness depending on the switch you are using. → If you are concerned about looseness, you can use a small piece of cut plastic wrap to insert into the mounting part or fill it with a small amount of kneaded eraser to use without looseness. → We may make adjustments if we are concerned about looseness during the production stage. □ Due to being handmade, there may be uneven paint, distortions, and air bubbles. □ The actual color may differ from the image depending on the environment. □ Although it is new and unused, we have tested it with several types of key switches to ensure there are no defects. □ The strength and durability are inferior to commercially available keycaps. *Leaving it in the bag can cause stickiness, so please store it in a well-ventilated place when not in use. We appreciate your understanding. _(._.)_ #MechanicalKeyboard #GamingKeyboard #ArtisanKeycaps #Handmade