Please note that there are scratches and peeling on the wood, so this item is offered as-is. This does not affect its use. This is a die for a coin case wallet. It's a simple coin case design. When making a coin case using this die, you will need to sew the leather together as shown in the photo. You can easily sew it together if you pre-punch holes in the leather with an awl or similar tool. The size is approximately 22 cm x 18 cm. Ideally, a press machine is best, but you can also cut it by tapping. When tapping, it's better to use a rubber mallet or a mallet. Place the leather on top of the die and tap it with a rubber mallet or wooden mallet. The blade is sharp, so please be careful not to touch the blade.