This is a professional-grade power supply. Made in 2012. Although it's a foreign specification (120v), it was working fine. ⚫︎ Upon checking each port for this listing, ports ⑤ and ⑥ only output approximately 15.5V when using the DIP switch on the AWAY side. (Normally around 12V. NORMAL side is normal at about 9.2V). The cause is unknown. All other ports are working normally. ⚫︎ No accessories such as DC cables or AC cables are included. Only the main unit is included. Please consider the above two points before purchasing. It is priced accordingly. I will pack it carefully with bubble wrap and cardboard for shipping. [Specifications] ■ Power supply for guitar effects pedals ■ Pedal Power series ■ Features ・Industry-standard power supply, chosen by guitarists and effect pedalboard builders worldwide ・Fully isolated design prevents interference between effects pedals ・Employs custom toroidal transformers with magnetic coils on each output for extremely low noise ・Uses linear power supply that generates almost no ripple or noise, providing clean and stable power at the highest audio level ・Equipped with short circuit protection to protect effects pedals ・Two DC outputs with the same voltage and current can be connected with a voltage doubling cable (sold separately) to output 18V or 24V, etc. ■ Number of DC outputs: 8 ・1-4: 9V/12V 100mA x4 (12V on AWAY side of rear DIP switch / Boss ACA compatible) ・5-6: 9V/12V 250mA x2 (12V on AWAY side of rear DIP switch / Compatible with stompbox modelers such as Line 6 DL4) ・7-8: 9V 100mA with SAG function x2 (9V 100mA when DIP switch is NORMAL / SAG function operates on AWAY side of DIP switch, adjustable between 9V and 4V) ■ Body size: W152xD86xH44mm ■ Body weight: 0.91kg ＿＿＿＿＿＿＿ BOSS ibanez maxon MXR EleHamo EHX keeley Keeley pedal train Pedal Train strymon CAJ