This is an "easy-to-assemble tablero" that the buyer will assemble. ◉ The handmade item is photographed and displayed. ◉ It will be shipped in the state shown in "Photo 2". ◉ The tablero will be completed by tightening the screws in "Photos 3 and 4". ◉ "Photos 1 and 5-11" show the completed product after assembly. ◉ The scale is horizontal, and both ends are open for ease of use. ‼️ ‼️ ‼️ ‼️ ‼️ ‼️ ‼️ ‼️ ‼️ ‼️ ‼️ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This is an "easy-to-assemble tablero" that the buyer will assemble. ◎ Finished size Length 34 x Height 12 x Width 11 cm Distance between vertical boards: 30 cm Board thickness: 2 cm ◎ Scale: →→ Included ◎ Non-slip base: →→ Included The thickness is uneven to prevent wobbling. ◎ Shipping It will be sent in the state shown in "Photo 2". ◎ Assembly The buyer will assemble it. Assemble by tightening the four screws in "Photos 3 and 4". It has been disassembled after being assembled once, so there are pilot holes, and reassembly can be done with a single Phillips screwdriver. ❶ Assemble the vertical and horizontal boards by aligning the "⚫️" marks. ❷ After aligning the marks on the two vertical boards with the horizontal board, check that the front/back and left/right/up/down are not reversed before screwing them in. ❸ Align the tips of the screws passed through the vertical boards with the screw holes in the horizontal board, and then tighten them. ❹ The assembled tablero is disassembled and shipped, so you can assemble it as described above. ❺ The "⚫️" marks will be hidden and invisible when assembled. ❻ If there is any wobbling, loosen the screws and adjust. ★★★★★★★★★★ ★ Finished Quality ★ ★★★★★★★★★★ ・ There may be scratches, color unevenness, knots, warping, unevenness in the materials, scratches, dirt, unevenness, gaps, cut misalignment, and glue unevenness/overflow from processing. ・ Please consider purchasing with the understanding that it is handmade and does not have the same beautiful finish quality as manufactured products.