This is a clone pickup set designed based on the FENDER Custom Shop Fat '60s, emulating the late 60s style. It's tuned to have a moderately fat and sticky mid-range, and a vintage-like, clear high-end, making it particularly easy to handle in the clean to crunch range. Alnico magnets are used to achieve a warm and natural response without being overly sharp. This configuration aims for the so-called "FAT 60s sound." The middle position is RWRP (Reverse Wound Reverse Polarity) for hum cancellation in half-tone positions. Neck ・DC Resistance: 6.0kΩ Middle (RWRP) ・DC Resistance: 6.0kΩ Bridge ・DC Resistance: 6.2kΩ ※All have a slightly higher output, typical of the FAT 60s style. Structure/Specifications ・Magnet: Alnico 2# ・Pole piece spacing: 2-1/16 inches (52.39mm) ・Pole piece diameter: 3/16 inches (4.76mm) ・Mounting screw spacing: 3 inches (76.2mm) Recommended for: ・Upgrading Strat-style guitars ・Those who want to easily try the FAT 60s sound ・Players who prioritize clean to crunch tones ・Those who like vintage-leaning tones These are not mass-produced items, but are handmade by individual builders, so there may be slight variations. Please understand this as a characteristic of individually made products. Notes: ・This product is a self-made pickup made by an individual builder.