⚠️ Each cable is made to order. Please allow 1-2 days for production after purchase. ⚠️ Cable colors may be white or black. ⚠️ This is a SCART cable and is NOT compatible with RGBJP21 (Japanese standard). Please be especially careful if using with a Framemeister. (RETROTINK 5x, OSSC, and GBSC are compatible.) This cable is made using used UL20276 material. I select the cleanest materials, but there may be some signs of use. This is an RGB cable for the Super Famicom. It can also be used with RGB-modded Nintendo 64 consoles. The length is approximately 1.5-1.8m. RGB Cable Specifications: ・SCART Pinout ・RGBS video with 4-pin independent shielding ・Luma sync ・Characteristic impedance 75Ω cable (UL20276) ・Solid ground plane processing on a dedicated circuit board ・Separate ground for video and other signals ・Designed to match the circuit of the Nintendo official RGB cable Independent video shielding helps maintain characteristic impedance and reduces bleeding, ghosting, and blurring caused by crosstalk and signal reflection. Luma sync is effective in suppressing diagonal noise caused by composite video. To illustrate the effect, it's like using a high-quality converter such as the RETROTINK 5X, resulting in rich colors and image quality similar to running an emulator on a PC screen. There is no color alteration from the cable (such as the inclusion of a separate amplifier). It's simple but high-quality and efficient, which is important. It's also convenient to have a standard cable to use as a reference when evaluating consoles. Because it uses LUMA for sync, it is not compatible with the SNES Jr., which does not have S-video output. This cable has the same specifications as the cable included with the "1chip Super Famicom". Thank you for your interest.