Thank you for viewing this product. Please read the profile section before purchasing. This is a listing for [Mini 4WD Catcher Dampers]. ■ Cut from Tamiya's genuine Mini 4WD catcher, black. You can use it without restrictions from daily practice to Tamiya official competitions. ■ 《NEW!》 Developed based on the highly acclaimed [typeF] with the cooperation of leading racers active in the Sendai/Tomiya area! With a double frame structure of main (black) and sub (black) and the adoption of angle adjustment chips, a variety of settings that cannot be achieved with one-piece cut-out products are possible! -------------------- [Product Details] * Total Length → Main: approx. 61mm Sub: approx. 62mm * Mounting hole center to catcher rear end → Main: approx. 57mm Sub: approx. 58mm * Ideal for the popular MS chassis (flex). * Main only (image 4), sub only (image 5), main + sub (image 6) - versatile settings are possible to match the course layout! * A side frame is newly installed on the main to apply tension when combined with the sub! (Image 8) Main plate initial position can be maintained! * Tension can be further adjusted using the included chips (please attach them to the sub plate with double-sided tape, etc. - see images 9, 10, 11) * Mounting holes for weights are not drilled. Please adjust the hole position and total length to match your machine (image 12) * The images are samples. Please note that the cut lines of the product you receive may differ slightly. * Genuine catchers are used. There may be vertical creases as shown in image 13, or the product's characters and pressed patterns may be randomly included as shown in image 14. * Available colors: [BK/BK] [RD/BK] [BL/BK] [C.G/BK] * List of typeF only (including custom) is here ↓↓↓ #CatcherDamperTypeF -------------------- [Handmade by an individual.] There may be individual errors in size, cut lines, and hole positions. Please purchase only if you agree after confirming the images. Please ask if you have any questions. [Search Keywords] Tamiya mini4wd Mass Damper MS Chassis (Management No. 68)