This is a set of 6 outlet peg buttons. ※The image is a sample. The color, chamfering finish, and other specifications may vary slightly depending on the incoming lot. Although unused, these are outlet items and may have scratches or stains, so please refrain from purchasing if you are looking for a pristine item. I find them useful because they are inexpensive and reasonably functional. I like the brown pearloid, it looks good. Made of resin and lightweight, they are also recommended for those who want to reduce weight and speed up response. ※Images 7 and later are examples of installation. They could be attached to Gotoh and Schaller type pegs, but there may be some stiffness when inserting them, or some play in the torque feel. There may be differences in the shape of the shaft insertion opening depending on the button shape, so we cannot guarantee that they will always fit. We recommend using genuine manufacturer parts for peg button replacement, so please do so at your own risk. As advice, use the original washers and screws as they are, and if they don't fit, such as if the length is insufficient, use the included screws or adjust by changing the number of washers. If the mounting holes do not fit, you may need to shave and enlarge them, but it may be better to give up and use something else if the diameter is different. The play in the torque must be adjusted by tightening the screws. ☆For both electric and acoustic guitars★ Resin peg buttons can crack, so handle them with care. They will crack if overtightened, and thin buttons will crack from strong lateral force. If the screws are not properly engaged, the grooves will be stripped and they will become unusable, so please check carefully while installing. We cannot be held responsible for damage due to lack of experience.