Thank you for viewing. I purchased this item used, but I am selling it because it didn't match my neck. This is a Stratocaster-type body that was custom ordered from Deviser in 2017. It is made of 3-piece ash, with an oil stain finish without grain filling, and a lacquer coat. Also, the cavities have been shielded with copper foil, so unlike the common carbon-based conductive paint, there is almost no high-frequency roll-off. The depth of the neck pocket is approximately 17.0mm. The end width is approximately 56.0mm, but please understand that there may be some error. * There is a repair mark on the upper left of the back neck plate (as shown in photo 11). The basic dimensions are based on Fender specifications. Ash wood, which has become increasingly valuable in recent years, is available at this opportunity! Regarding the weight, I do not have a measuring instrument, so it is unknown, but my impression is that it is a medium-light level. Please check the photos carefully for any minor scratches, and if you have any questions, please contact me. Thank you very much.