Thank you for viewing this product. Please read the profile section before purchasing. -------------------------------------------------- This is a listing for [Catcher Damper for Mini 4WD]. ■ These are cut from Tamiya's genuine Mini 4WD catcher, clear green. They can be used without restrictions from regular practice to Tamiya official competitions. -------------------------------------------------- [Product Details] * Total length → Approximately 60mm * Center of mounting hole to rear end → Approximately 35mm * Can be used with the popular MS FlEX, FM-A chassis, etc. * Sufficient effect can be expected with a light weight of about 1g to 1.5g! * Not compatible with body catch. * This is a long-stroke catcher damper that is mounted using the position of the rear bumper mounting hole. * The included tension plate can maintain the initial position of the catcher. It also prevents excessive bending downwards and allows for traction adjustment on the chassis. Please use it for setting up. * Genuine catchers are used. Please note that vertical creases may appear as shown in image 7, or the product's characters and pressed patterns may be randomly included as shown in image 8. The cutting position cannot be specified. * The images are samples. Please note that the cutting may not be from the same location. * Tamiya genuine catchers other than clear green are also cut in limited quantities. If you wish, please consult us in the comments before purchasing. The available colors for production are the 5 colors shown in image 9. * From the following tags to the Mini 4WD product list ↓↓↓ #tsumugu's Mini 4WD related listings * Product list for typeH only ↓↓↓ #CatcherDampertypeH -------------------------------------------------------------------------------- [Handmade by an individual.] There may be individual errors in size, cut lines, and hole positions. Also, fine fluff may remain from the cutting, so please understand. Please refrain from purchasing if you are overly concerned. Please purchase only if you can agree after confirming the images. Please ask if you have any questions. [Search Keywords] Tamiya mini4wd Mini 4WD Catcher Damper Mass Damper Double Shaft Single Shaft [Management No. 33]