This is a set of wires and equipment for practicing the Second Class Electrician's Skills Test. Wire Contents: VVF 1.6mm 2-core VVF 1.6mm 3-core VVF 2.0mm 2-core (blue sheath) VVF 2.0mm 3-core (blue sheath) VVF 2.0mm 3-core (red/black/green) EM-EEF 2.0mm 2-core VVR 1.6mm 2-core VVR 2.0mm 2-core IV Black 1.6mm IV White 1.6mm IV Red 1.6mm IV Green 1.6mm Equipment Contents: Receptacle (flush-mounted) Receptacle (surface-mounted) Double receptacle Receptacle with grounding terminal and grounding terminal Receptacle with grounding terminal, 20A 250V Receptacle with grounding terminal (flush-mounted) Single-pole switch (flush-mounted) Switch with pilot light (flush-mounted) 3-way switch (flush-mounted) 4-way switch (flush-mounted) Terminal block 6P Lampholder Hanging ceiling fixture (square) Hanging ceiling fixture (round) Pilot lamp (flush-mounted) Circuit breaker Flush-mount frame Outlet box Insulating bushing Box connector for non-threaded conduit Non-threaded conduit Box connector for PF conduit Flexible plastic conduit (PF conduit) Rubber bushing (for 19mm) Rubber bushing (for 25mm) Ring sleeves x small/medium Push-in connectors * Please note that the screws are missing from the box connector for the non-threaded conduit. Please understand that we will not be able to provide support after the evaluation to prevent any issues.