【For Angel in White @ Please Read Profile First-san's Order】 (Main Requests) ----- ① Is it possible to create this based on the plan for a Bible and a B6 notebook? → Yes, it is possible. ----- As an inquiry if possible: ② Can the front and back of the backing board for the insertable system organizer be reversed, allowing it to be carried independently? I would like to know if the backing board can become the cover. → It can be carried. However, with the usual design, the back side will appear as the front when reversed. Therefore, if you reverse the leather's direction and attach the rings, the front side will become the cover. In this case, the back side will be the front when inserted. If you are concerned, you can reduce the exposure of the back side by decorating the surface of the leather. ----- ③ Can the system organizer's rings be made smaller than 15mm? I'm imagining around 8-11mm. → Unfortunately, it's only up to 15mm. I've been looking, but I can't find any available. ----- ④ Is it possible to add a billfold pocket to the pen holder refill? → Yes, it is possible. ----- ⑤ I'm thinking of carrying it as lightly as possible. Approximately, what will be the total weight? → It depends on the type of leather, but the Alaska leather A6 type was 230g. The B6 area is 1.5 times that of A6, so it will be approximately 350g. Adding billfolds, etc., will increase the weight accordingly, so please consider 350g as the minimum. ----- I plan to use a 365 Days Notebook. According to the official specifications, the dimensions are W129mm x H182mm Yellow to orange shades Pink and burgundy, etc., red shades Dark green is also acceptable ----- (Price) This is the price of the reference source. We will provide an estimate once the specifications are finalized. (Product Information of the Reference Source) 【Main Standard Specifications】 The rings are installed on a protective sheet, so the ring hardware is not visible from the spine. Also, a pen holder that also serves as a divider is attached. ※ The overall size is designed with a ring diameter of 20mm as standard. It can be made 15mm or 30mm, but it will be an additional cost. ※ Since the hardware procurement fluctuates, it will be settled with the actual cost (including fees) added.